Skip to content
Home » How Do You Mix Wella Toner And Developer

How Do You Mix Wella Toner And Developer

Using a measuring cup, mix 1 part toner with 2 parts developer (double the amount of developer to toner). For example, for an all over application on shoulder length hair, mix 50mls of toner with 100mls developer. Using a brush or application bottle, apply the toner mixture to damp, towel dried hair.Feb 9, 2022

How much developer do I mix with toner?

Mix your toner with a developer in a 1:2 ratio. Use an applicator brush to work the mixture into your hair, focusing on the areas with unwanted undertones. Leave the toner in for up to 45 minutes, then rinse, and wash with a moisturizing shampoo and deep conditioner.

How do you use Wella T18 Toner with 20 developer?

Mix 1 part Wella Color Charm toning color with 2 parts 10 or 20 volume Wella Color Charm developer. Apply to towel dried hair then, develop for up to 30 minutes. Check frequently to see if desired results are achieved. You can customize the toner formula by intermixing shades.

What happens if I put too much developer in toner?

Your mix will be too dry, and you won’t be able to saturate the hair properly with product and you may also get uneven and patchy color results. You will not be lifting out enough of the hair’s natural melanin. This will mean you may end up with darker hair than you wished for.

Do you apply toner on wet or dry hair?

The short answer is that toner should be applied to damp hair, not dry or wet. It is best to apply toner to damp hair because it ensures that the toner is absorbed without risking damage to your hair. You should aim for your hair to be about 70% dry, where it isn’t completely dry to the touch but isn’t dripping wet.

How long do I leave in toner T18 on yellow hair?

So, according to the instructions, we can glean that the maximum amount of time to leave Wella T18 on your hair is 30 minutes. However, if you leave it on for 30 minutes, your hair may get over toned, so let’s dive a bit deeper into this.

Why is my hair still brassy after toning?

If the toner failed to work effectively on the orange hair, a blue toner must be applied again to neutralize the undesirable tone. If you feel that the orange tone is too dark or intense, you can bleach your hair again and then apply the blue toner to achieve a lighter blonde.

What does 1 part to 2 parts mean in hair toner?

1 to two ration means for one part of toner you use 2 parts developer so one part toner is 1.4 in this case wouldn’t you just multiply 1.4 with 2 and get 2.8? Shane Anthony Stickney Jr. · January 31, 2020.

Should I wash my hair before using Wella toner?

It’s best to apply toner to hair that’s still a bit wet so it gets distributed evenly, so dry your hair enough so that it’s still slightly damp but not dripping. If you’re not using toner right after bleaching, simply wash your hair with shampoo beforehand and towel dry the same way.

Do I shampoo after Wella toner?

To help the toner ‘stick’ better in your hair: rinse, treat and style as usual – and then wait approximately 3 days before washing the hair again. There is no need to shampoo after using the Wella Color Charm Toner.

What happens if you apply toner to dry hair?

Should I Apply Toner On Wet Or Dry Hair? Your hair has to be a little damp or towel dried while applying a toner. To be precise, you should always use a hair toner when your hair is 70% dry. You will achieve better results if you put toner on damp hair and not dripping wet or completely dry hair.

What Wella toner cancels out yellow?

The Wella T18 Toner is the only toner of the range that’s purple based and it’s the most powerful at combatting yellow tones.

Does Wella toner lighten hair?

This toner won’t work on anything else. You can use the toner on highlights or balayage. But, be aware that because you’re mixing toner with developer, it may lighten darker parts of your hair.

How can I measure my hair developer at home without a scale?

Use Measuring Cups

If you’re wondering how to measure hair dye without a scale, then you’ll need some measuring cups. Make sure that they’re plastic, not metal. You can use a measuring cup to measure your color and developer before mixing. You can use two separate cups or a single one that you clean out between uses.

Does 20 developer lighten hair with toner?

Without bleach, 20 volume developer alone can lighten your hair by about one level. So if you’re currently a level 5 light brown, using 20 volume developer alone can lighten it to a level 6 dark blonde.

What happens if you use 30 developer instead of 20?

The 30 volume developer also works like 20 volume, but it will lighten the hair’s original color by two to three and is more efficient when the desired color is no more than two levels lighter than the original color.

Can I put Wella toner on dry hair?

Apply your Wella Toner to damp, towel dried hair. This will help the toner not to ‘grab’ at sections of the hair (which can leave some parts more toned than others).

Do you apply toner all over hair?

Toner does not have to be used evenly on all of the hair, but it can be. Don’t worry if you make a mistake and get it on the darker strands of your hair; the toner will not affect them. For example, you may want to tone down highlights or your roots. Always apply toner to damp hair so it distributes evenly.

How long do you leave toner on orange hair?

Get the toner on as fast as possible, and watch it. It may take all 20 minutes, but it could tone after 5 minutes. You will see your hair change, so once you notice the orange or yellow disappearing, rinse it out.

Does toner get darker the longer you leave it on?

Toner is typically used after bleaching or coloring hair to help correct the color. However, if it’s left on for too long, it can have the opposite effect. The chemicals in toner can react with the natural pigment in your hair, causing it to change color.

What toner removes orange?

If your hair is orange, you’ll need a blue toner. Try a blue shampoo to tone the brassiness and get rid of the orange. This color toner is commonly needed for darker hair.

Does T18 turn purple?

T14 has silvery tones that you won’t get with T18. Since T18 has a violet base, it’ll leave a violet undertone to your strands. T14, which has a blue base, will be much more gray/silver than violet.

Which Wella toner should I use for orange hair?

Beige: T11, T15, T27 & T35 are toners for orange hair that help to define lightened hair color in warmer shades of blonde.

What happens if you tone your hair twice?

You can tone your hair twice, but you shouldn’t tone your hair twice during a short period of time. Toning your hair twice in one day will significantly damage your hair.

How do I go from yellow blonde to platinum?

Toning from Yellow to Platinum Blonde

  1. Use intense pearl blonde 100V. This is the fastest acting toner on the market today. It contains a lot of purple (violet) pigments. …
  2. Use Brilliant Blonde Purple Shampoo & Mask After Toning. The purple pigments in these products will kick out any remaining yellow.

Apr 29, 2022

Which is better Wella T18 or T14?

Although they might look similar, the colors of Wella T14 and Wella T18 are different. T14 is a pale ash blonde with violet-blue tones, making it better for hair that still has some orange left in it. T18, on the other hand, is Lightest Ash Blonde with only a violet base.

How long do I leave Wella toner on for?

Let the toner sit for 8–10 minutes for a lighter shade or 20–25 minutes for a darker shade.

What is the best toner for brassy hair?

11 Best Drugstore Toners For Brassy Hair

  1. Matrix Total Results Brass Off – Blue Shampoo For Brunettes. …
  2. Amika: Bust Your Brass Cool Blonde Shampoo. …
  3. Joico Color Balance Blue Shampoo. …
  4. John Frieda Violet Crush For Blondes Purple Shampoo. …
  5. Garnier Nutrisse Ultra Color Blondes Nourishing Anti-Brass Treatment.

More items…•Sep 8, 2022

Should you shampoo after bleaching?

Shampooing and Conditioning Your Hair. Avoid washing your hair for the first 48-72 hours after bleaching it. Give your hair ample time to seal in its new color. Because bleaching is such a volatile process, your cuticles remain open for longer immediately following a bleaching session.

How many bottles of toner do I need?

It depends on the length of the hair. One bottle is enough for short – medium length hair. Any longer and I’d say two is needed since you want to saturate the hair so it all tones evenly.

Can I use purple shampoo instead of toner?

Purple shampoo acts as a toner to get rid of brassy tones and return your hair to a cooler, salon-fresh blonde. Using purple shampoo is a key step in helping dyed blonde hair look vibrant and fresh.

What developer do I use with Wella toner?

Mix 1 part Wella Color Charm toning color with 2 parts 10 or 20 volume Wella Color Charm developer. Apply to towel dried hair then, develop for up to 30 minutes. Check frequently to see if desired results are achieved. You can customize the toner formula by intermixing shades.

Can I use purple conditioner after toning?

While keeping your locks deeply hydrated. Some feel the ultra-purple pigment is the perfect toner for blonde that’s turned dull and yellow. Even better some find they can purple condition after every wash to tone their hair. Which works to keep their color consistently cool and ashy.

Should I use purple shampoo before or after toner?

After pre-lightening the hair, you will want to create a clear, clean canvas prior to depositing your final tone. For example, after bleaching, apply purple shampoo or a violet toner for a neutral base, and then apply your final hue.

How long after toning hair can I wash?

After the initial color service, we recommend waiting to wash the hair for AT LEAST 48 hours. BUT! The longer you wait, the better. This allows time for the hair cuticle to close, which may help color last longer.

How can I tone my yellow hair to ash?

When deciding how to tone yellow hair to ash, try using a violet shampoo first. As purple is the opposite of yellow on the colour spectrum, the shampoo’s purple pigment draws out the yellow brassiness from your blonde, neutralises those unwanted tones, and makes your colour look cooler, healthier and more vibrant.

Do you apply toner to roots first?

1. When toning, always apply the root color first, says Cassandra. This helps with timing and allows the root to process the longest—giving it the max depth and deposit necessary. Pro Tip: Cassandra says she always tones on damp hair, and when working on blondes, she rarely goes darker than a Level 6.

How soon after bleaching can I tone my hair?

If the highlights are brassy or too bright apply the toner after washing the bleach off. It is designed to glaze the bleach and make it look more natural. Doing it right away will help it last longer. However, if your are considering re-dyeing the hair anyway, do not tone.