Skip to content
Home » How To Connect A Powered Subwoofer

How To Connect A Powered Subwoofer

You can connect a subwoofer to the high (speaker) level connections with speaker wires or a speaker connector. Check the specifications on your subwoofer beforehand. Using high (speaker) level connections will use the same audio signal for other speakers allowing for more precisely-timed bass.

Can you connect a powered subwoofer to a speaker wire output?

You can connect a subwoofer to the high (speaker) level connections with speaker wires or a speaker connector. Check the specifications on your subwoofer beforehand. Using high (speaker) level connections will use the same audio signal for other speakers allowing for more precisely-timed bass.

How do you power a powered subwoofer?

How do you connect a powered subwoofer to a powered speaker?

All you have to do is connect your powered subwoofer’s line level input (or LFE input if there are two line level inputs) to the T1’s smart subwoofer output using a cable with RCA connectors on both ends.

How do you connect a powered subwoofer to a passive speaker?

If the subwoofer’s structure has spring clips to use speaker wire, you can connect the receiver’s speaker output. This method is identical to connecting a basic stereo speaker. If the subwoofer comes with one set of spring clips, then join the receiver’s network to the subwoofer as the speaker.

How does a powered subwoofer work?

A subwoofer uses a larger woofer as well as a built-in amplifier that powers the signal to provide deeper, cleaner bass. Most subwoofers are powered, meaning they require their own individual power supply from an electrical outlet to power a built-in amplifier.

Can subwoofers use RCA cables?

Any single, standard RCA or subwoofer cable should do just fine. However, if the sub is exhibiting a hum with the RCA/sub cable plugged into it, then maybe try using a “shielded” subwoofer cable. One end of the subwoofer/RCA cable will be plugged into the Subwoofer Output on the back of your receiver.

Why do subwoofers have left and right inputs?

Since the subwoofer is responsible for low bass tones (aka its sole purpose), it requires a transmitter of low-frequency audio waves. The left and right channels are combined in an LFE cable to allow for a singular cable to evenly disperse the signals to the subwoofer.

How do I install a subwoofer if I don’t have a preamp subwoofer?

Plug the male ends of your cables into your subwoofer input and the two female ends into your preamp output from the receiver. If your subwoofer has only one RCA input, plug in the Y-Adapter, effectively turning a single input into two and allowing you to make use of both channels.

How do I connect my wireless subwoofer to my speakers?

Connect the Transmitter to an AV receiver.

Connect the single RCA adapter cable to the subwoofer pre-out or LFE channel of the AV receiver and to the input on the SoundPath Wireless Audio Adapter transmitter. Connect the micro-USB cable to the wireless transmitter and the power supply, then plug into a wall outlet.

How do you connect powered speakers?

Connect the wires to the powered speaker. Get the other side of the wire and connect it to the mixer. Make sure that the volume of your active speaker is low before turning it on. Turn them both on, and congratulation!

Are powered and active speakers the same?

In a powered speaker, there is one amplifier that powers all the drivers (low and high frequencies) while an active speaker has one dedicated amplifier for each driver. Passive speakers don’t have a built-in amplifier and need to be powered by an external amplifier or receiver.

How do you wire a rear speaker subwoofer?

Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.

How do you connect a powered speaker to a passive speaker?

The safest way to use powered speakers and passive speakers together is by using a mixer. Get your signal output through a mixer with two outs. Run one pair to the powered speakers and run the other to the passive speakers. Double-check the wire and power connections to ensure that they are tight and secure.

What is the difference between a passive and active subwoofer?

The difference between passive and active subwoofers is that passive subwoofer depends on an external amplifier, while an active subwoofer contains a built-in amplifier.

Can an active subwoofer power passive speakers?

Interestingly, you can use passive speakers with an active subwoofer. However, you will need to connect a designated amplifier with the speakers to provide them with a power source since the built-in amp in the active sub does not supply power to external speakers.

How do I power my car subwoofer?

Run the power cable from the battery to the subwoofer.

Lower the wire down into the engine compartment and through the firewall hole until it emerges inside your car. Then, go inside your car to pull it all the way to the subwoofers.

Are powered subs any good?

Powered subwoofers can give you a quick, easy and efficient way to upgrade your car audio system. There are many benefits of having a powered subwoofer such as: better bass response, no need for additional amplifiers compared to non-powered subwoofers, simple installation vs.

Where do I put my subwoofer?

A subwoofer placed in the corner of a room may increase the subwoofer’s output – causing the sub to sound louder. Try placing your subwoofer in a corner and see how it sounds. However, depending on your floor space, a corner might not be a viable option for your subwoofer if it’s too far from your listening area.

What cable do I need to hook up my subwoofer?

Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.

What cable do I need for a subwoofer?

Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal.

How do I hook up a subwoofer to my RCA cable?

If the subwoofer’s LINE IN uses RCA cables and the subwoofer out on the receiver/amplifier also uses RCA, plug it in using an RCA cable. If the cable is split on one end (a y-cable for both right and left channels), plug it in the R and L ports on the subwoofer.

Is a subwoofer mono or stereo?

Sub-outputs are usually only 1 Phono RCA connector, as the signal is mono, also called the LFE channel, which makes up X. 1 in the naming of a 5.1 or 7.1 surround setup. If there are more subwoofer outputs on the surround receiver, these are also in mono, it is possible to connect multiple subwoofers.

How do you hook up a subwoofer with two inputs?

if the sub has two inputs you can either just use one input or use a Y-splitter and use both. using both will add 3db to the input signal. if you were to run dual subs with two inputs on each sub you’d need a bunch of wires and a bunch of Y-splitters.

What does LFE mean on a subwoofer?

The low-frequency effects (LFE) channel is a band-limited audio track that is used for reproducing deep and intense low-frequency sounds in the 3–120 Hz frequency range. This track is normally sent to a subwoofer—a loudspeaker designed to reproduce very low frequencies.

Can I connect subwoofer to pre out?

Can You Use Pre-Out For A Subwoofer? Although not ideal, you can use pre-out for a subwoofer, provided that the subwoofer has a built-in amplifier. The subwoofer will only play the bass frequencies delivered by the pre-out ports and cut off the high frequencies that can’t be played through them.

Does a wireless subwoofer need to be plugged in?

Although the wireless subwoofer arrangement eliminates the long cable usually needed and allows more flexible room placement of the subwoofer, both the soundbar and subwoofer still need to be plugged into an AC wall outlet or power strip.

Can you connect a subwoofer to a Bluetooth speaker?

Yes, you can connect your bluetooth subwoofer to a bluetooth speaker. For this to work, the devices must be close to one another. This will ensure an adequate signal and that the speaker and subwoofers will be able to work well together.

Can you wire Bluetooth subwoofer?

It is not possible to connect two devices at the same time using Bluetooth. It is possible to connect two new and two old subwoofers at the same time, regardless of whether they are the same model.

Do powered speakers need an amp?

Powered speakers do not need an amplifier. They have an amplifier already installed in them which is why they are called ‘powered speakers’ to begin with. What is this? Depending on the speakers’ input options, you can hook them up to different audio sources without the need for a separate amplifier.

What cable do you use for powered speakers?

Since powered speakers or powered monitors are “powered,” the cables are NOT passing current. So typically, depending on the speakers, you’ll either need unbalanced mono cables (instrument cable or guitar cable) or a balanced TRS cable going from 1/4″ TRS to XLR (or possibly a straight-up XLR cable).

Can I connect powered speakers to an amplifier?

So can you connect an Amp to Active Speakers? “Physically it is possible to connect an amp to active speakers but it is ABSOLUTELY NOT recommended as potentially you will ruin your powered speaker and possibly your amp”, the golden rule is Power + Power = Disaster.

How do you know if a speaker is active or passive?

The simple difference between active and passive speakers is that active speakers require power and passive speakers don’t. This is because active models have built-in amplifiers, while passive models require external amplifiers.

Do active speakers need a preamp?

Most powered speakers still require a separate phono pre-amp. In any case, internal amplification and the built-in phono pre-amp eliminate the need for two separate components – a receiver and discrete phono pre-amp.

Do active speakers need to be plugged in?

With an active speaker it needs to be plugged into AC power, so you’ll need to make sure that it’s close enough to a wall outlet, unless you want extension cords running all over your living room.

How do I connect my subwoofer to my computer?

Plug a 3.5mm to dual RCA cable into the yellow output. This is a center / subwoofer dual output, so either the white or the red RCA is now the subwoofer out. Set the computer up to output 2.1 sound, plug the white and red RCA plug in one at a time and see which one makes the sub put out sound.

How do you connect a bluetooth subwoofer?

Why do subwoofers have 2 RCA inputs?

Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. If you have a processor with very low output so you can use a Y-splitter. By using both inputs with the same mono signal doubles the subwoofer sensitivity.

What’s the difference between RCA and subwoofer cable?

An RCA cable connects a subwoofer to a receiver with an audio signal sent to the standard left, right, and center channels with a coaxial connection. A subwoofer cable typically contains the same wiring but has additional shielding added to reduce the speaker hum and provide greater sound clarity.