Samsung Plasma Tv Troubleshooting

Troubleshooting an LG plasma TV that won’t turn on is a very general process, as the issue is often due to the TV not receiving any electricity. In some instances, it can also be due to a defective power supply, damaged buttons on the TV or remote control or a switched-off surge protector.

How do I fix my Samsung plasma TV that wont turn on?

Why is my plasma TV not turning on?

Troubleshooting an LG plasma TV that won’t turn on is a very general process, as the issue is often due to the TV not receiving any electricity. In some instances, it can also be due to a defective power supply, damaged buttons on the TV or remote control or a switched-off surge protector.

Why did my plasma TV go black?

Secure Connections

If some of the input sources work, but your screen is still black when using your desired input, you need to check that device to see if you can find the issue. Check the power cable running to the device to ensure it is receiving power.

What would cause a Samsung TV not to turn on?

If you are having trouble turning your Samsung Smart TV on, it could be an issue with the outlet, cable, remote, or tv itself. The display of the red standby light is important. In normal use, the red standby light is on when the TV is off, and the light is off when the TV is in use.

Why won’t my TV turn on but has power?

Try unplugging the TV from the electrical outlet. While its unplugged, hold down the power button on the TV itself for about 30 seconds. Once that time is up, release the button and plug it back into power. Power the unit back up and see if you can see any imagery.

How many years should a plasma TV last?

However, due to technology improvements made over the years, most plasma sets have a 60,000-hour lifespan, with some sets rated as high as 100,000 hours. If a plasma TV has a 30,000-hour rating and is on eight hours a day, its half-life would be about nine years.

Should I repair or replace my plasma TV?

If the TV is still covered by a warranty (manufacturer, retailer, credit card, or purchased service contract) of course I would get it repaired. If the TV is more than 3 or 4 years old I would expect that the it is more economical in the long run to replace the TV than to repair it.

Can plasma TVs still be repaired?

Some problems on a plasma TV can be fixed at home. A repair technician may charge hundreds of dollars to repair a plasma TV, but you can save time and money by repairing it yourself. You can fix internal plasma TV problems such as dead pixels, screen burn and other distortions.

Why won’t my Samsung TV turn on but red light is on?

If your TV hasn’t been updated to the latest firmware, it may experience software issues that may lead to a red light problem. To fix this issue and get rid of the red light, you will need to update your TV’s firmware and then restart the TV. Your TV will work more optimally after you do this.

How do I reset my TV if it wont turn on?

What to do when your Samsung TV turns on but the screen is black?

If your Samsung Tv is having issues with being unresponsive, you can bring it back to life by performing a soft reset. To do this, unplug the TV for 60 seconds and then plug it back in. This will fix any issues that may have arisen from a temporary bug. A reboot can also fix the issue.

What to do when your TV turns on but the screen is black?

Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues. Factory reset of the TV to resolve the issue.

How do you fix a black screen on a plasma TV?

Why won’t my TV turn on but red light is blinking?

In these situations, the blinking red light means the TV is either receiving too much, or too little electricity. For example, if there’s been a lightning storm in your area, or if the TV’s power supply is simply old or faulty, the blinking red light will appear when you try to turn your TV on.

Why did my Samsung TV turn off and wont turn back on?

You may need to reset your remote control. Remove the batteries and then press the Power button and hold it for about eight seconds. After that, you can put batteries back in and try to turn on your TV using the remote. If it’s still not working, maybe it needs new batteries.

How do I know if my TV fuse is blown?

Depending on the make and model of your TV, use a screwdriver to unscrew the TV fuse cap holder. Then, carefully check the fuse wire. If you can see a visible gap between the wires or a visible metallic or dark smear inside the glass, you have a blown TV fuse.

Why was plasma TV discontinued?

Since manufacturers were focused on making 4k LED TVs, plasma TVs became less available, and by 2014, Panasonic, LG, and Samsung all stopped their plasma production. LED TVs surpassed plasma sales in 2007, and they haven’t looked back since.

How long should a Samsung TV last?

Samsung TVs can last around 4 to 7 years with constant usage. This includes having it set on the highest brightness, and almost always being on. If you care for your TV properly it can last you much longer than this time frame.

When did Samsung stop making plasma TVs?

In 2014, LG and Samsung also discontinued producing plasma TVs, and that was pretty much the end of the line for plasma TVs.

What does it mean when my Samsung TV red light flashes?

A red flashing power light on a Samsung TV usually indicates a power supply failure, but it can also be a glitch in the HDMI hookup or a technical defect. Troubleshooting the problem may involve replacing the television if the power supply is bad or resetting the HDMI connection.

Can you leave a plasma TV on all day?

You can leave a plasma television on for 24 hours a day, seven days a week. In fact, many airports use plasma televisions to display flight information and these are rarely turned off.

Do plasma TVs burn out?

Screen Burn in Samsung Plasma TV may occur when stationary images are displayed for a long time. This can cause uneven aging of Plasma displays that leave subtle, but permanent burned-in ghost images in the Plasma TV picture.

What happens if you lay a plasma TV flat?

Commonly, the reason that you’ll see for why a flat screen cannot be laid on its side is that you’ll damage the plasma or LCD crystals inside the screen.

Are plasma TVs still worth anything?

The only plasma TVs that still retain some value are the last generation Panasonic top of the line and Pioneer Kuro Elite TVs. Donate it and take the tax write off.

Should I keep my old plasma TV?

If you are happy with the picture, keep it. I am still using my Panasonic ZT60 and see no reason to replace it. The older plasma panels are rated at 60,000 hours and the newer ones are rated for 100,000 hours! I used my previous plasma 42″ panel for 10 years.

Is it worth getting a 10 year old TV fixed?

The reasons why your tv or A.V equipment is not worth fixing in Australia is because the labour repair costs equate to 90% of the cost of brand new equipment and you are guaranteed for a minimum of 12 months with new purchases – where as a repair you are only guaranteed for three and most of the time it’s what’s called …

Are plasma TV worth repairing?

Today’s TV screens are not meant to be repaired and the cost of parts isn’t worthwhile. The only LCD replacements I see are for Laptops only. Where the cost of the computer makes it worth fixing.

Is it worth it to repair a TV?

If you want to reduce waste or have a simple fix, repairing your TV is worth it. However, sometimes the cost of repairs can exceed the cost of a new TV. Therefore, depending on the age of your TV and the parts you need to replace, replacing your old TV with a new model is more cost-effective.

Can you fix dead pixels on a plasma TV?

Dead pixels are like dead skin, you TV will keep shedding them every fortnight until there are no more pixels left. Unfortunately TVs are not humans and cannot regenerate new pixels (skin).

How do I reset my TV without a remote?

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

What does it mean when your TV won’t turn on?

Soft Resets. If the television still won’t turn on, turn your TV off at the wall and unplug it from the plug socket. Wait 30 seconds, and then plug it back in and switch it on. This is called a ‘soft reset’ and should recalibrate the TV.

What causes Samsung Black Screen of Death?

Why Samsung Screen Turns Black and Dead? The most common reason could be your device’s crashed system. When your Samsung memory gets lower, or you meet a system update failure, the system would be crashed and stuck with a black screen on your Samsung Galaxy.

Why is my Samsung TV not displaying anything?

Cable connection problem: Your Samsung Smart TV is likely to have a black screen issue due to the cable connection problem. Loose connections, damaged cables or inactive power sources are the probable cause of the problem on your TV.

Why did my TV screen go dark?

If Picture mode is set to Cinema or Custom, the screen may become dark. If the screen is still dark after the picture quality mode is changed, change the setting Backlight, Picture, Brightness and adjust the brightness to your taste. 2. If Power Saving is set to Low or High, the screen becomes dark.

Why is my TV not showing picture?

If your TV is getting its signal from an external source. i.e. a cable box or a DVD player, then the possible reason why it is not displaying a picture is that the cable connecting the TV to the cable box or DVD player is loose or damaged. The cable that is responsible for displaying a picture is the yellow cable.